November 9, 09 - Analyze That!

Filed under: , , , , by:

Social Learning Theory – Lev Vygotsky

Students do better if they have an instructor.

Looked at psychology of play: When children are really young they don’t really have the ability to use their imagination. Not til 4or 5 are they able to real imagine.

People act within a culture and the culture acts back to them and children learn.

One of the first things they lean are symbols, gestures. – children will come up with a motion that means bottle and eventually they will use a word for their desire to have a bottle.



Video Blog Learning

Is there really a value to this or is it just that the teacher is a very good teacher?

The key is that it has to do with feedback. Practice with feedback is the most important part of instruction.

It’s also the quality of the interaction.

What is lacking with video is appropriate physical contact.

Video gives you body language cues to also give feedback.

The feedback must also be relevant.

There is a lot of nuances in feedback.

Knowledge or results is one form of feedback (you do something and u see what happens when you do it – the problem is you might not know why it happened when you did that).

The way you are taught becomes a part of what you are taught.



What are my sub-tasks for a slop shot

Choose which sub-task to execute. – the choose should go on the same level as the
sub-tasks in the hierarchy.

Must keep the verb a noun form or when we break down something it will turn into a list of procedures instead of the performance of a task.

November 2, 09 - Task and Objective Analysis

Filed under: , by:


Perform a Slap Shot
Task Analysis
1. Position hands on stick
                2. Determine if you should grip the stick right handed or left handed
                3. Grip the stick right handed
                                4. Place the left hand on the very end of the stick
                                5. Place the right hand (power hand) approx. a shoulder length down from the left hand
                6. Grip the stick left handed
                                7. Place the right hand on the very end of the stick
                                8. Place the left hand (power hand) approx. a shoulder length down from the right hand
9. Position your feet
                10. Face feet towards the puck
                11. Place feet so the puck is between feet width
12. Face your body toward the puck
13. Look at the Puck
14. Lift stick into air
                15. Raise the stick to the height of your waist
                16. Slide your power hand down the stick towards the blade
                17. Shift your weight to your back foot
18. Swing stick down
                19. Swing the stick down as hard as you can
                20. Slide your power hand down towards its original position
                21. Shift your weight forward
22. Strike ice with stick a few inches before the puck
23. Push puck forward with stick
24. Follow through with stick
                25. Shift your weight to front foot
                26. Twist your wrests
               



Objectives Analysis
1. Position hands on stick T/O
                2. Determine if you should grip the stick right handed or left handed T
                3. Grip the stick right handed T/O
                             4. Place the left hand on the very end of the stick T
                             5. Place the right hand (power hand) approx. a shoulder length down from the left hand T/O
                6. Grip the stick left handed T/O
                             7. Place the right hand on the very end of the stick T
                              8. Place the left hand (power hand) approx. a shoulder length down from the right hand T/O
9. Position your feet T/O
                10. Face feet towards the puck T/O
                11. Place feet so the puck is between feet width T/O
                (Place your feet the distance from the puck your stick reaches. Position feet so the puck, while                           some distance away, is spaced in between your feet) O 
12. Face your body toward the puck T/O
13. Look at the Puck T/O
14. Lift stick into air T/O
(Swing the stick into the air in the opposite direction you want to shoot the puck) O
                15. Raise the stick to the height of your waist T/O
                16. Slide your power hand down the stick towards the blade T/O
                17. Shift your weight to your back foot T/O
18. Swing stick down T/O
                19. Swing the stick down as hard as you can T
                20. Slide your power hand down towards its original position T/O
                21. Shift your weight forward T
22. Strike the ice with stick a few inches before the puck T/O
23. Push puck forward with stick T
24. Follow through with stick T/O
                25. Shift your weight to front foot T/O
                26. Twist your wrests T/O
                Point bottom of blade toward target O


October 23, 09 - More Skills!

Filed under: by:

Skill Learning - Usually takes a learning companion to get to expert level in skill.

Many actions to perform, dynamic path, adaptive, involves judgment, evaluation, people become experts with practice, there is a flow between individual actions, may require scaffolding in the early stages, can be learned in pieces and then integrated (learn to shoot a ball and later learn to dribble and eventually put it all together),involves the direction of attention, etc – all these things play into a skill.

Skill knowledge becomes complied.

Teaching a skill requires a skill.

With skills, there are novices and experts.

Make sure you include this: One of most important parts of instructional strategy is practice with feedback (without this you can’t become an expert). – without feedback u don’t know what u need to change to become an expert.

Model the skill (demonstration)! Must do this! And maybe add explanation-verbalizing the skill???

You continue to work on parts of the skill once basic ability has been achieved.
This is how you become an expert.

Information info processing load – as a novice, you have to think about every act and as an expert you don’t have to think about the individual acts if u don’t want to.

Efficiency of performance – novice is low efficiency and an expert high – that is, expert can do it a lot faster.

Fluency of performance – novice is choppy, expert smooth
Ability to direct attention – novice doesn’t know where to look, expert can look at a couple of different things

Degree of consciousness and deliberateness of action – novice must be very conscious and deliberate but an expert must get beyond that. But an expert might be focusing on one little element of a skill trying to improve it, so in that since it is conscious and deliberate but the rest isn’t.

Level of arousal – novice is very stressed, expert isn’t stressed all the time (but when an expert is stressed they make mistake). – experts will be stressed over certain little parts as they try to become expert in that part. – you have to make sure learners aren’t over stressed. There needs to be a little stress, but too much.

Ability to learn cues in environment – as a novice, sometimes a couch has to tell them what to look for. – do this so you can anticipate what will happen and so you can do it better and faster.

Degree of feel or intuition during performance – novice doesn’t feel but expert does.

Moving towards expertise involves raising the standard and possible continuous and nature of the task (by adding complexity to the task – add or subtract steps of task). When you teach a novice, you teach them the easiest form of that task.

Simplify the task to its bear bits or even do part of the task ourselves so they can accomplish the task and then in time remove scaffolding and let them do more of it themselves.

You can’t stand still with expertise; you either get better or get worse.

As an expert u can observe things selectively.

What s the difference between a skill and a habit and is there a different.

Every expert is also a novice (with some small part of a skill).

Ability to adapt to previously un-encountered circumstances – design implications – student needs to be able to de-contextualize.

Automaticity of performance comes with practice.

October 21, 09 - Skills (and I Don't Mean Bo Staff Skills!)

Filed under: by:

Bloom’s Taxonomy

Use higher level thinking.

There are multiple taxonomies for several different things, like motivation, cognition, etc.

Evaluation is the highest level in the chart we normally think of.



When theorists tell their theories they are producing design language as well. It also fits with one of more of the layers.

There are literally thousands of design languages. There are classes: content, strategies, control system design, representations (there are tons of languages in this class), etc.

Idea of layers is becoming wide spread among a certain group of academics.
Any great idea takes about 25 years to go from inception to widespread/full use in society.

Focusing on the process only will get u in trouble.

Project 2 – Design Instruction to teach a skill. Project one was about conceptual knowledge. Project 2 is performance knowledge, how to perform something.
Every human performance happens in an environment – in involves a human and sometimes something that human is acting on (called a system). Humans act on systems. And the systems act back – they respond by what we do to them. It’s an action-reaction cycle.

Now, the system has rules by which it works or operates. These are the operational principles.

The human has – behavior rules, knowledge, procedures, and skills – they use these to operate on them system.

There are things in the environment that can have an influence on the system and the human but humans learn to use the system within the environment. The environment is called the context.

In order to teach people how to interact with a system in the real world (context) we create models of the context and the system and train people within it.

Study Simulations – AG has a chapter (Ch. 9) in the Regiluth book on simulators.

In the simulators we supply what we call a “Learning companion.” – The LC helps scaffold the learning. It does this by “communicating” to the human and the system (by setting certain parameters, etc).

A short coming in our design thinking: many designers say it’s not worth creating simulators and they just make the same old training (teacher at front of class and reading text, etc).

Don’t give up easily, create real performance environments that people can learn in. If for some reason you can’t do this, only scale it back the least you have to, don’t just drop to the basics, text.

What is a Skill – consists of an extended performance of something – there is more than one act and they are put together in sequence. The difference between a procedure and skill is that a skills you can’t determine the order of the acts, with a procedure the acts are pretty much always in the same order.

Skill is somewhat unpredictable because you are never quite sure how it will unfold.

A learning companion can be an instructor, a text, a computer (either that is or isn’t intelligent), etc. Anyone/thing that helps ur learning process. – in order to design the learning companion you have to forecast what the learners will have a hard time with. – that’s why having a human as a learning companion is nice because it’s easier.

October 16, 09 - Systematic Approch to Design

Filed under: by:

Intentional Learning

Normally teachers determine what the students will and will not learn. Also students aren’t using the info they receive. – these are 2 problems S. found with classes in general.

In intentional learning students choose their own learning and goals and students also interact with others to build knowledge.

Computer Supported Intentional Learning Environments (CSILE) – this sounds very much like what I wanted to create for students in a history class. – I should take a look at this sometime.

This is an instructional theory.

Might be able to find an implementation of this if I search for “Knowledge Forum.”

Systematic Approach to Design


Don’t just use a liner process to design. It should be much more dynamic than that.
System processes were even being used into the ‘80’s.

Training was designed the same time the new product was being created and so the training designers developed a systemic design approach.

Design is both a rational and irrational process. It’s kind of paradoxical in several ways.

Gibbons, Vol 1, 134 and 135 - first 2 boxes of ADDIE process, Analysis and Design

We won’t go through the development and implement stages of ADDIE in this class.

There is no course on implementation in our department.

Systematic approaches are all pretty much the same they just split some boxes and combine others.

Strategy is never a very well defined idea, that is, the word strategy isn’t well defined.

Our field’s terminology is very, very fuzzy. Its sometimes difficult to understand what some people are trying to say specifically because of the fuzziness of our definitions.

Interservice procedures of instructional systems development – tried to make it so everyone could be an instructional designer. Worked for a little while but things just got to complex with what needed to be designed that it just didn’t work not to have someone who wasn’t specialized in ID. Also, this approach is to simplistic to make a good design.

October 14, 09 - Critiquing Designs

Filed under: by:

Give a brief summary of the product.

Control – pause, play, stop, etc. Students have chance to respond to questions

Message – list major messages. Could typify the messages – this set is about importance of heart, this set about what happens inside heart, etc. Classify messages give main messages

Strategy – perhaps timing(how long each activity will happen). Social organization, roles, responsibilities, sequence of events, strategy of events, etc.

Content – summarize content and maybe refer to outside article. Including diagram would be good. Include the shocking of heart. Describe cause and effect (and how-?)

Data Management – data kept on individual students. This layer is interested in data generated during instruction that can be used later in the instruction or on another instruction.

Media Logic Layer – (often you keep referencing the same thing in your design but u focus on a different part). Tell what instructor should be looking for. So, device does this, devices does this, etc.

Use a dynamic, computed model of heart so the content layer sends info – so I’m using an animation generator. – it would create a dynamic representation.

Messages don’t have to be verbal.

Many things we do as designers we don’t have names for. We don’t have a language of “message design,” but we should – same for other layers.
Data Layer – data that will be stored – use this to make future decisions about activities, etc.

Layers allow specialties to create their part of the design, or rather, to figure out all the details that are needed to make the design work. Otherwise, one person (who doesn’t know about certain layers very well) would have to write it all and it’s a pain to do and it doesn’t come out as good as it could.
How will student be engaged in this learning.

October 7, 09 - Class Notes

Filed under: by:

Social Learning Theory – Albert Bandura

Bobo Doll experiment
Give attention to behavior, retain behavior (memory), ability to reproduce, motivation to do so.

When people understood they were able to do something, they were more likely to try.
Bandura started as a behaviorist and turned into a Cognitivist because of his experiments.


Describe Design Doc. In terms of Layers
If you haven’t planned things carefully from the beginning of an Instructional Design it will be a big pain. But if you can break ur design down into layers you can see what you will need and it will be easier to see what is missing and u are more likely to see what u are missing earlier on.

It is probably also easier to make changes and see how those things will affect the other aspects of the design.
Layers form when a specialty forms and people tend to work within layers.
So, when a design starts being broken down into layers, you know who should work to develop a certain part of the design because the person who specializes in one layer will work on that layer.

The first heading in paper will be an intro. About 2 paragraph. Talk about what you have designed and how it is intended to be used (one para per each).
Other paras - further more is what has to go on in the layers (functions) that has to be performed in each of the layers.
Describe representation first (b/c this is the concrete part)
Control Layer – explain what the controls are and what the purposes of the controls are.

Message Layer – what kinds(not nec. specific messages) of messages will be nec (intro, directions, content messages, etc)
Strategy Layer - (where the conversation takes place between learning and instruction) determine what conversation take place when (and why?)

Content Layer- a set of cause effect relationships out of which a model of a heart can be built – the hearts rules so to speak (this will be hard to explain) – be able to explain WHY the heart beats – pacemaker . make a table, - this happens and as a result this happens. X occurs and then makes y happen. Make this into a table. – make this very general, a page or page or a half at most.
Data management Layer -

Media Logical Layer -
Put into the design doc enough info so that someone else could build this thing without talking to you about it.

My Heart Design - Re-designed!

Filed under: , , , , by:

Tuesday night I decided I wanted to completely re-design my idea for the heart design project. As I watched the moive “Iron Man” I saw the main character use an interactive hologram. I want to make my heart design based off of this idea.


The use of Hologram technology in the motion picture "Iron Man."

MY DESIGN

This is how I envision the lesson beginning. There is a table top-like surface and hovering slightly above it in the air is the hologram of a human slightly transparent but with somewhat of a solid like look (similar to what is seen in the movie clip above). The coloring would appear very close to real life, but with the alpha level turned down a little (creating the transparent affect and also allowing you to see all the organs but also see past them kind of like x-ray vision). The figure is posed much like Leonardo’s famous anatomical drawings of a man, the figure is also spinning slowly around its y-axis allowing the user to get a full view of the figure. Words would appear would appear above the figure like “learn about your heart” or “why does your heart beat,” or “What makes you tick?” I should point out that this design could be used with any number of lessons about human anatomy so the messages above the figure could just as easily be about some other body function. There could also be audio such as appealing music and a voice reading the words that are floating over head.

User Interface

There would be a few “buttons” and upon clicking them additional options would appear, similar to a drop down list in a computer application. The user of this hologram would be able to “zoom” in and out of the figure so you could look closely at the heart. The option would be there to make other organs appear or disappear such as “view muscles,” “view bones,” “view lungs,” etc. This way the user can control how much they see or don’t see. If they want to look closely at the heart without being distracted by other parts of the body they might zoom in close and select to have nothing visible but the “heart” (no doubt a few other parts would be include in the “heart only view”) or they could zoom out and include other organs to see how everything looks together. There would also be a way to select between “normal view” (just seeing the organ, such as the heart) or cutaway view (where the part of the heart facing you would be removed so you could see inside). Because this could become confusing or the learner could struggle with the controls, there would be several predetermined views (highlighting different aspects of the heart)that they could also select.

There would also be a way to choose to view the heart functions and such as “view movement.” By choosing this the user could see the heart beating (and also see how the other systems they have chosen to view operate in relation to the heart). They could speed up, slow down or pause the movement. The user would also be able to rotate the hologram around the x and y axis to see it from different angles.

In addition to what I have mentioned, the user could interact with the hologram just like in the Iron Man clip. Learners could reach into the heart and “squeeze” different areas to see how the contracting spaces forces blood out of the chamber.

Tutorials

All of the things I have described give the user the ability to explore just about any part or function of the heart that they want. But before they are ready to do this, they will probably need some automated tutorials about the heart. This would be the final “button” the user could select. Choosing the “view heart tutorials” would bring up a list of different tutorials that would run through different aspects of the heart. One might talk about how the values work and how blood flows through the heart. Another might explain where the blood comes from in the body and where it goes to once it has been oxygenated. One tutorial could explain how the heart and lungs interact and the final tutorial could demonstrate how the pacemaker interacts with the heart.

These tutorials could be paused, speed up, slowed down, rotated, etc (pretty much all the same controls that were available when the tutorial wasn’t playing) allowing the user to stop and experiment with what they are hearing in the tutorial.
The tutorials themselves would consist of a pre-determined view of the heart specific to the topic of the tutorial (such as certain elements visible, rotated a certain way, etc) but these could be changed by the student at will during the animation to allow for exploration. The hologram would demonstrate what the audio narration would be explaining. Important terms, such as ventricle, would appear as words above or next to the hologram. If the term is a part of the heart, the part of the heart would be temporarily highlighted (shown brighter than the rest of hologram) and/or pointed to with an arrow.

Check for Understanding

Finally, the device might ask the students questions to test their understanding of the content. If the students don’t know the answer they can be referred to different tutorials that might help them find the answer or told to look at a certain part of the heart or watch a certain function.

Heart Project - Start of Design Ideas

Filed under: , , by:

Introduce Concept: Heart

The first thing I would do would be to try and activate the students’ prior knowledge as well as learn how much the students already understand about the topic. Students of this age should have some prior knowledge about the circulatory system and maybe even a basic understanding of how the heart and lungs work. I could have students share things with the class that they remember as well as give them some terms and see if they know what they mean. I could also ask basic questions about the actual functions of the heart.
Start Adding to their Knowledge

I would then walk then introduce the students to the animation (but not run the animation yet) and help them identify important parts of the heart and learn the terms for these parts. I would focus on the ventricles and atriums. Once they had the terms down I would run through the animation one frame at a time and explain to them what was happening as I did so. There are a few things that I must make clear about the diagram.

The animation on the Utah.edu site doesn’t show where the blood is coming from or where it is going to. Just looking at the model the students could get the incorrect notion that blood coming into both sides of the heart is coming from anywhere in the body completely missing the importance of the lungs. They could also make the assumption that blood being pumped out of both sides of the heart could be going out to anywhere in the body again forgetting the lungs. Special care must be taken to ensure students understand that blood pumped OUT of the “blue” side is going to the lungs and that blood coming into the “red” side is coming in from the lungs.

An additional problem with this animation is that it makes the blood appear blue! Our blood is never blue, it is always red. True, the shade of red changes depending on whether or not the blood is oxygenated, but it is never blue. This is a false idea we get from looking at our veins which appear blue (although they are not blue, they just look that color through our skin) and from models and animations such as this one that label veins and the blood within them blue.

Also something to be aware of is the fact that when you are looking at the animation of the heart, you are not looking at a mirrored image, you are looking at the heart as if you could see into the chest of someone standing in front of you with their face towards you. Thus the right ventricle and atrium are on the left side of the diagram and vice versa for the other side of the diagram.

September 30, 09 - Layers and the Miracle Box

Filed under: , , , by:

Expectations – Russell Osguthopre
Learning over time decays or it grows to a certain point at which it is stable and isn’t lost or learning continues to grow forever.
If you don’t have high expectations for learning you probably won’t learn much. – how true!
Success raises your expectations about learning and this creates a cycle that continues to increase! The more success the greater the person’s expectations and so the greater the success and on and on.


ADDIE/ISD –the miracle box!


Layers – different specialties just like in a building, lighting is one, drywall another, etc.
Any technology that gets advanced it splits into different areas or specialties.
Don’t try and do it all! Learn as much as you can and if you are going to manage a team of people you won’t do it all yourself, and you will manage a team. And the more you know about all these different specialties the better when you are leading a group.

Cheaper, better, faster. That’s what we will offer!

May as well buy these books: Look at Brans’ book, “how buildings learn.” Also look at Schon, “educating the reflective practitioner.”

Each domain (layer) has its own design language (drywall terms for drywall layer, electric terms for electrical domain, etc).

Layers are in the mind of the designer. If one layer posses a greater number of layers than another, then he is so much the better in the world of design than the other.

Instructional Design – good to use a 7 layer system, but layers can have lots of sub-layers!

See ur design in terms of layers from the beginning so you don’t have to destroy ur design to add something to it.
Also buy the book “Design rules: the power of…” by Baldwin and Clark

How do u know what the right number of layers is? You don’t! We aren’t looking for absolute truth but for what works, there no absolutes in terms of answers (at least we aren’t trying to find them), we are just trying to find something that works.

If it works, its’ good enough.
Layers, domains (and sometimes modules) are all the same (sometimes modules are something totally different but uses the same name).

Anytime you speak of layers think of functions!

Representation layer – only layer that a sensory experience for one of more learners (in Gibbon’s mind) and therefore the only one that has concrete presence. The rest are abstract. Motion is part of representation too!

There has to be a set of control (which u could call the control layer) that provides people with an opportunity to respond.

Message layer – might include several elements such the name of a step, an action, what you see, or when you are finished. – the intention to make a communication from a certain type

Control and message layer is where communication takes place. Control is the user’s communication and the message layer is what the instructor or program communicates back to the learner.

September 28, 09 - My Impressions/Class Notes

Filed under: , , , by:

Problem Based Learning – student is just thrown into a learning problem and students have to figure it out themselves. This is similar to what we had to do in this class with our assignment to present on various topics that we really don’t know what we are doing. That is we all come up with our own solutions although they may not always be the right method.

Used in medical schools.

The extreme version of this would probably not be good to use with younger students. The instructional designer needs to be aware of the age/ability level of the students.

Similar to guided instruction? The instructor guides learning. IN PBL the tutor doesn’t do that. He doesn’t take part in the actual learning. He just makes sure that they are doing their parts (is there more to this?)
What we know, what we need to know, where, assignments. Each group member keeps track of one of these things.

When there is a well control problem based learning method is used students are superior to students who just memorize rote material. This is because in problem based learning student not only learn the info, they learn the processes nec. to find answers.

This balance is very crucial and must be maintained. If it is up-set, this will not work.

Works well with something that has a correct answer. Used with professional training.

Design Based Research – something that we should look at.
You find the operational principle by taking away different parts of a design until you find it.

I THINK PROBLEM BASED LEARNING MIGHT BE SOMETHING I’D BE INTERESTED IN STUDYINGMORE ABOUT AND MAYBE EVEN TRY DESIGNING! –pros/cons of doing this for a career - I bet it takes for ever to make a design, but it pays pretty good too!

AND NOW FOR SOMETHING COMPLETELY DIFFERENT!

ADDIE/ISD

ADDIE - Analysis, Design, Development, Implementation, and Evaluation
ISD-Instruction Systems Development (outgrowth of system design or approach)
Under this system there is usually a “miracle box” in which you are told to design something but you aren’t told how to design it.
There are hundreds of ISD models.

As designers, we need to know what happens inside the “miracle box.”

3 ideas(this was in the lemonade stand reading):

1.Decision Making Cycle- Process that rationalizes the steps that a person would go through while making a design decision. A DESIGN IS JUST A BUNCH OF DESCISION THAT HAVE BEEN MADE. All you have to do is make a decision! A bunch of design decisions put together is a decision document.

2. Staff Action Pattern

3. Design Layers (aka architecture)

September 23, 09 - Presentations Galore!

Filed under: by:

Schema and Mental Models – This is the one I presented on. Used the restaurant analogy which I thought went very well.

Operant Conditioning – Stimulus yields response. But reinforcers are used to adjust, change or re-enforce a behavior.

Skinner box and pigeons!

This is a good system to use with lower order learning. Good with Dogs, not so good with higher order thinking in humans (or so I believe).

In order for this to work, the subject must want the re-enforcement.

Reciprocal Teaching - Instructional theory

4 strategies: Questioning, Summarizing, Clarifying, Predicting

At first the teacher leads the discussion and teaches them this strategy (this is usually done in reading circles). Gradually the students take over and teacher moves to the outside of the circle.

Students know they are responsible for certain types of questions that are related to gaining reading comprehension.

Students would also rotate through who asks and leads the discussion for a certain kind of question.

The principle of reciprocal teaching is that the group creates a model of cognitive processing and the group gets to see that model again and again until it is internalized. – Students learn how to learn.

Rand Spiro - cognitive Flexibility Theory

Variable content and variable application of that content. – Such as in medical school, lots of things people could be suffering from but hard to tell what is the actual cause.

Do mini case studies which can help improve students’ learning.

Multiple perspectives – kind of you get lots of different views or ideas about a topic and you look at them all and sort of build your own understanding about the topic. That’s basically what I did when preparing my presentation on Schema and Mental Models. There was a lot of stuff and it all kind of said something different but I was able to work out myself what all this meant.

Before the sources you viewed would be controlled, but with this you would sort it all out.

We are constantly forming and reforming what we know or maybe I should say, you improve your understanding, you see more of the nuisances or see new connections and add new pieces of information to what you already knew.
How humans learn is vital to instructional design!

September 21, 09 - My Thoughts on More Presentations

Filed under: by:

Pebble in the Pond (design theory)– creating learning and environments and products instead of just describing how a person learns. (Merrill’s Model)
Each ripple encompasses the previous ripple.
1st Ripple represents the whole problem or task.
2nd ripple – progressive problems
3rd ripple- analysis
4th ripple – instructional strategy
5th ripple – interface design
6th ripple – Production –were you actually produce the things that you’ve designed.
This is similar to skill learning in that you break it down into parts and teach the parts.
People in the instructional design world are friends with each other and are borrowing ideas from each other.
We must remember that a constraint at different ripples will affect the other ripples even the ones that came before it.
First Principles – (instructional theory)Merrill again
Says all instructional theories have the same start.
Activation - find the material in the mind that people can build off of.
Demonstration
Task centered instruction – using strategies to help people learn task
Integration – when you integrate knowledge for use in the world.
Merrill tries to stay away from learning theory. He addresses the designer and instructor. – it sounds like might mesh well with mine.
Component Display Theory - trying to define a basic set of building blocks that you could use to create a strategy.
Doesn’t worry about how something ties into a learning strategy.
Every theorist has to have some set of assumptions.
Merrill doesn’t refer back to learning theories.
Merrill tried to create simplifications of the design and instruction process.
These 2 ideas of Merrill were more for the new bees, the designers who were just starting out. It was never intended to be something that you follow rigidly all through a person’s career.
Customized designs can’t really be created using Merrill’s theories.
Keep breaking the mold, don’t keep looking back or you’ll never make new ground.
Anchored Instruction –
Instructional theory
Students are more likely to learn material if it’s put into context of something useful and something the students will be interested in.
With the anchor, you also have an explanation of what the principles are within the anchor.
Bransford has a video recording on the McKay site
What is it about the story that makes it anchored instruction? The story poses a problem that the learners watching the story have to answer. Identify to the students the task the students have to learn. Anchored instruction is a way of identifying the problem to the student, right?
What theories have caught my interest? Mirrored neurons, Anchored learning, Micro simulations, Meta cognitive, Cognitive Apprenticeship,

September 18,09 - Presentations Cont. and a Bit of Philosophy

Filed under: by:

You can’t move forward when you are looking behind. You can’t get stuck on one theory. Sometimes great ideas get ignored. Don’t get caught in a paradigm, a secure argument and that sums up the world.
We don’t work on Learning Theories anymore, but on theories of learning.
You have to just start piecing the world together. You must keep on reading even after we graduate.
Bro. Gibbons philosophy on science, Tech., and how it all fits together:
I can’t buy into the idea that we continue to learn throughout eternity. We do learn in eternity but eventually we reach the peak and there isn’t another peak. The scriptures and several modern prophets have clearly said that God does not continue to learn. His increase is due to glory, the rearing of his children into eternity. That is his increase, not additional learning. Joseph Fielding Smith makes this very clear in Doctrines of Salvations, Vol 1, chapter 1.
The empirical processes of science don’t fit well in social science because the human element doesn’t work well with that system. Social scientists have to go about things in a slightly different well. This is where control group research. Philosophers don’t fit into this system, they stand apart from all this.
There’s almost a hierarchy of learning types, physics at top and others down the snobbish scale till you get to near the bottom, and that’s where IPT and sits. This is partly because we use the word technology and don’t have the word science in it.
Many fields are actually technologist but call themselves scientists and this is to give more credibility to their field.
Objectivity is a myth.
One of the dangers of institutionalized science is that you can buy the study you want to back up what you want it to back up. Corporations (and I would add governments) can do this. Science working and bringing forth good knowledge must come from truthful scientists. – I think this is really is true and I use global warming as an example!
Design Based Research. Supposed to be a Very good class and concept we should think about/ work for. I think I’d like to check this out.
A lot of these theories are a continuation of non-sense. It wasn’t right to begin with and yet people keep playing with it for decades and so the field doesn’t move forth
End of Philosophy
Mirrored Neurons – Same neurons fire when you watch an action and when to perform that same action.
Not sure the role that all this plays into life and everything yet.
Design implications of this: Dynamic visualizations – watching a video or something like that when you try to understand a concept instead of just looking at static visualizations such as pictures. In other words, dynamic vis. You watch the moon switch from phase to phase instead of looking at pictures of different phases of the moon. Sometimes dynamic work better and sometimes not.
Bro. Gibbons philosophy again/more on mirrored neurons:
Instructional designers, because they have been so interested in being recognized by science, they ignore some important ideas like mirrored neurons.
Example does a lot to help teach – maybe because of Mirrored Neurons.
Could you teach a dance or music skill without saying a word, just at modeling? –Possibly so and that could be because of mirror neurons.
Some people seem to lack the ability to mirror others.
Pornography could be so dangerous because of mirrored neurons!
Everyone is their own instructional designer, we just don’t know it!
If God tells us to obey, then we can, even if we think we can’t.
Mirrored neurons could be the thing that helps us connect with other people, to have empathy, etc.
This is why movies with lots of violence are probably not good for us.
I have to say, that I don’t agree with everything in this philosophy, but I think there is a lot of good stuff in what was said and I’d like to get more information about much of what was said, esp. mirror neurons.

September 16, 09 - My Thoughts from Presentations

Filed under: by:

Cognitive apprenticeship (instructional Theory) - Only in modern society have we gone away from apprenticeship style learning. We aren’t learning so much the actions any more but the cognitive actions, the meta-cognition actions. Four areas of importance:
1. content – subject matter (4 kinds, one is meta cognition)
2. Sociology – who is there when learning takes place and what are their roles. (5 things)
3. Sequence – order in which things happen in instruction is not random, there is a reason. (4 things)
4. Method of Instruction – (6 different methods – one of the methods is not lecture, its apprenticeship)
Voice Thread – a great way to add instruction for something.
Increasingly Complex Micro Worlds (ICM)- a sequence of mini environments or worlds that increasing become more complex. Students learn one little task and then is given a new task to learn which incorporates previous tasks and new tasks.
You can see how your own skills factor into the more complex actions when you have a more advanced person who you can watch do the more complex things.
Tennis ball shooting machine – focusing on just the swing before you worry about placement of the ball in the court.
Undo button – allows exploration of computers and such. Starts small.
Designers need to consider the right entry points for the learner. Also consider how to make that person feel “safe.” Consider intermediate challenges that are obtainable to help build confidence.
Allow the practice of certain skills in isolation thus you don’t have two master 2 skills at first. Try to identify problems with the learner’s concepts early on.
This life is a mircoworld (missionary life to family to eternal family) of how it eternal life is.- what is temporal is spiritual, the principles are the same in either world.
Mircoworld is becoming much more into the cognitive domain.
Also, if one considers spiritual development, first we focus on family, then neighborhood, then community, nation, world and finally many worlds. This is an example of increasingly complex mircoworlds.
Gagne’s Taxonomy
5 major categories, learning conditions optimal for one might be different for another.
Gagne’s 9 Events – an instructional theory
These are learning events (9 of them)
We need to be deliberate in how we organize things
You could rearrange these steps if we need to. But we should probably do it with reason and not just because.

September 14, 09 - Presentations and Thoughts on Technologists

Filed under: by:

I enjoyed learning about Meta cognition. I was a little familiar with the concept already but I’d never really thought about all the implications of it. My roommate and I actually had a long conversation about it and as we spoke we tried to apply the principles of meta cognition. We were both amazed at how much more you can learn and the greater understanding it gives you, esp. when trying to understand what another person thinks about a specific subject.
I’ve also been thinking more about the differences between a scientist and a technologist. I considered myself a scientist most of my life (until I decided to study history in college) but I think I was really a technologist. I have built all kinds of things over the years including explosives and robots. I always based my ideas on scientific knowledge that I had but I also added things that I thought would make my design work better. At the time I couldn’t tell you why I thought the things I added would help in terms of science, but just had a hunch. Often, if I turned out to be right I would investigate further and discover the scientific principle behind why it worked. In all of this I just saw myself as a scientist. I realize now that what I was doing was playing the two different parts. Most of what I did was as a technologist by designing and building things and in so doing (by process of innovation) produced “new” knowledge such as “adding this makes my design work better.” I would then play the role of the scientist and try and figure out why that worked. However, I spent far less time trying to figure out why it worked than I did just designing and building.
When I recognized this difference, I realized that the people who I usually called “inventors” were in fact technologists. Before this, I had always just thought of inventors as some type of scientists. Our culture encourages this idea too. In the popular film “Back to the Future,” one of the main characters, “Doc” Brown, is always referred to as a scientist, even by himself. But I now see that he was really a technologist who used his knowledge of science to invent. Meeting a “crazy, wide-eyed” technologist just doesn’t have the same ring to it! This, of course, goes back to why the word science is found in lots of different places where another word properly belongs.

September 11, 09 - Learning Theory vs Theores of Learning

Filed under: by:

I’m still pretty confused about all the terminology but hopefully that will come together soon, right? I think some type of graphic that showed how all these terms come together and where they fit in comparison to one another would be helpful for me and probably many other people in the class as well.
I like the idea of “theories of learning” as opposed to “learning theory.” In my foundations class we’ve been studying lots of learning theories and one of the things we were supposed to think about as we read them was which one we liked, which one we felt we came closest to fitting into. After reading about all those theories, I didn’t like any of them! I thought they all had gaping holes. Each one had a point or two that I liked, but none came even close to getting everything right. While I think there is an explanation that brings all learning together, I don’t think we even begin to describe it. I feel much better about the approach of theories of learning. Here’s is a graphic demonstrating my understanding of the difference between these 3 approaches:

In this diagram we see that Learning Theories are trying to define everything, the whole pie. Theories of learning aren’t concerned with the whole picture; it may not even be a pie! Instead, they focus on different aspects of learning or different sections of the pie.
I think that the different areas of which theories learning focus, who, when, what where, why, how is very insightful. I think that is a good way of looking at learning and I believe each has a part to play. I never thought about how much “where” has to do with learning. I mean I knew it’s not good to study in a place with lots of distractions, for example, but I never thought about arranging virtually every aspect area you in such a manner as to promote learning. It’s amazing.
The other aspect of chapter 5 that stood out to me was the section about stories as a part of learning. I think this play a big part in my personal learning. Any story that I’m told I can remember with incredible ease but if you give me a detailed list of information or a list of numbers, I can’t remember it. I think this is why studying history was so easy for me but sometimes science could give me a hard time.

September 9, 09 - A Plethora of Terms

Filed under: by:

I have to say, I’m pretty overwhelmed by all the terms and relationships between the terms that we discussed today. While I struggle with the language, I think I understand, at least at the rudimentary level, what most of it means. The reason for looking at instructional design (and really, this holds true in any design) using the architecture we’ve discussed to is so that you can create better designs, identify reoccurring problems and solutions to those problems, and discuss various aspects of design with more ease.

I think I might have a basic understanding of Instructional theory, instructional design theory and the interplay between these two areas. From what I understand, instructional theory is concerned with the presentation of the instruction. It’s focused on the structure of the information presented. Instructional design theory concerns itself with how to build that structure. Thus, instructional design theory, while separate, works within instructional theory.
I like the idea of looking at design from a layers method instead of a process. I think that is how I naturally go about designing something. Even without this background in design, if I were to design a house, I think I would design it based on function. Looking at the different aspects of the house and what I want it to do just makes sense to me. I wonder why anyone would go through a purely process-driven approach. Using a layers approach and the design language, designers can specify problems they routinely encounter in a particular area and be able to more easily discuss these problems with others thus generating multiple solutions that can be employed. This, with other factors, allows that layer of design to advance much quicker than before. Another thing I like about this idea of layers is that every time you go to design something, you don’t have to start from scratch. Using different designs of a particular layer in combination with other layers could create a whole new design. Granted, each layer would probably require some modifications in order to make the overall design work, but at least you didn’t have to re-invent the wheel! You could then spend more time on another area of your design that is in need of more attention but which was in past designs had been ignored because of time constraints.

I am a little less clear about the design layers discussed for instructional design. The content layer seems to make sense. Taking the content, the abstract ideas and breaking into units is how I always approached teaching history: Egypt, Mesopotamia, Greece, and Rome. However, the farther down the list of layers I go, the less I understand the concepts associated with the layers. Perhaps this is due, in part, to the fact that these are areas that have largely been ignored by theorists. I think that as I become more involved in instructional design through this class and through designing instruction for the IPT 286 class I’m teaching, these layers of design will begin to gain more meaning for me.

September 4, 09 - Conversation as a Metaphor

Filed under: by:

I really enjoyed this chapter on conversation as a metaphor in instruction. I really think that there is significance to the ideas presented. There were a few things that stood out to me.
The argument was made that conversation takes place across different media and through time. This, of course, is absolutely true and I agree that learning can also be done over various media and over time, but is that really the best way to do it? True, it’s still conversation but is the conversation as valuable (important, meaningful, etc) as medium and time change and increase? Is there something lost when f2f conversation is lost? If there is no loss, why do people use video phones? While conversation may still take place as medium changes and time increases, is there something that gets lost, something valuable in instruction. Obviously if there is simply no other way to converse, say because the 2 people are in different countries these options are great and better alternatives’ than what’s been done in the past. But if f2f is possible, at least some of the time, would there be more value in conversing or instructing in this manner? I can’t say why but instinctively feel there is a greater value.
Page nine contained one statement: “in many cases, we have come to accept as a standard of adequate instruction the presentation of information without relevant responding and engagement by the learner.” I believe God is the perfect example when it comes to designing learning and He, like all designers, has certain resources with which He can work but makes the best instruction he that can be with what there is to work with. Take a look at the scriptures, a form of instruction that would seem to prevent conversation between the learner, man and the instructor, God. We’ve been told in the church numerous times to ponder the scriptures. Why? Because this is an opportunity for us to “respond” to what God has written. A conversation takes place. The conversation continues in another medium as the Spirit places impressions, thoughts, etc in our minds as we ponder. If we choose to ponder on the thoughts the spirit has brought us, we are again engaging in the responding process. As this cycle continues, we converse with God using different mediums but conversation takes place and instruction is given – spiritual learning occurs! Full conversational learning with God almost necessitates modern revelation!
One final statement provoked a great deal of thought for me: “some instructional theorists define instruction in terms of the ability to test what a person has learned: they say that if there’s no test, it’s not instruction. This would seem to disqualify conversations as instruction, because we seldom give tests on the outcomes of conversations.” I disagree with the argument these theorist make, there ARE tests in conversation, even casual ones. Perhaps they do not occur as frequently as they should, but they do occur. We often check to make sure others understand what we’ve said when we talk. How often have you heard the phrase “you know what I mean” in conversation? This is an attempt, granted a poor one, to test a person’s comprehension of what the other has said. Occasionally, people will have a misunderstanding, somehow the people involved have discovered that one person has not “learned” what the other intended them too. In order for this to happen, some type of test must have been administered.

September 2, 09 - Two Chapters and an Interview

Filed under: by:

Reading these two chapters has been an eye opening experience. I went through the education program at BYU, did student teaching and worked in the schools for a couple of years without ever really understanding the principles of technology instruction discussed in these chapters. I’ve never felt as though I was a successful teacher and I think I now understand why. At times it seemed I was a really good teacher and at other times I felt very ineffective. I now see that the times when I felt I was doing well were times I was successfully directing the natural energy of the students and the times when I failed I was failing to successfully re-direct that energy. I used the same methods but couldn’t understand why I got different results. The problem, it seems, with my attempts to direct the students’ natural learning was that I was not evaluating why there was a loss in their desire to learn. If I had recognized the differences I could have chosen a more effective way to re-direct their learning energies.

I am also fascinated by with the distinction these chapters drew between technology and science. Most of my life I have thought of myself as a scientist and always thought the realm that truly belongs to technology of being within the sphere of science. I now understand that while one affects the other, they are 2 distinct disciplines working on different problems.

I interviewed my friend Mike who builds computers. The very nature of building computers requires one to design. Lots of different criteria go into designing a computer, such as what will it be used for. Resources that come into play include how much is the client willing to spend and what products are available (RAM, motherboards, CPU’s, etc). With an idea of what the machine has to do and price range in site, Mike said he starts with selecting a motherboard and a case to fit it. At first glance, this seems like a natural place to start as these components are essentially the physical foundation of the computer. However, I asked if it wouldn’t make more sense to pick out the CPU first so as to make sure it will have the power to do what his client wants it to do. With the CPU picked out, you could then select a motherboard to fit it instead of the other way around. Enter around aspect of design: bias. Mike said he picks the motherboard first because he prefers a specific kind of socket (the part of the motherboard which allows the CPU to interface with the board). For better or for worse, bias probably always plays a part in design. And why not (to a point), after all, there are no “right answers” in design. Once the motherboard and processor are chosen, he picks out the RAM which will work with the motherboard, trying to get the fastest he can but keeping in mind what the client needs – to try and save them money if they’re price conscious – or the fastest, best RAM he can (within the overall budget) if the client wants the best machine they can get for a particular price. Using similar criteria, he picks out a graphics card, hard drives, optical drives, and other peripherals. Then it’s time to choose the power supply. This choice is dictated by how much power the machine will need to run all of its components. Finally, Mike says the most important thing to remember when designing a computer is to remember what it will be used for. Resources may affect this, but if you forget the end goal the design will suffer.

August 31, 09 - IDEO

Filed under: by:

I was really impressed by Ideo’s mindset which they used to come up with creative solutions. Instead of trying to become experts on a particular device or situation (such as the shopping cart) by sitting in a cubicle and thinking about it, they went out and talked to the real experts, people who had experience with different aspects of shopping carts. The group brainstorming was also unique. I loved the fact that crazy ideas were encouraged because it would allow more jump off points for designs that would work. In connection with crazy ideas was the guideline, “don’t criticize an idea.” I imagine this would be very difficult to do. I can see the potential this method has for producing new ideas that can eventually be adapted into something that will work. Finally, by having group members choose which designs they like as opposed to having just the boss pick what he likes, I believe better results were achieved. When just one or a few people make decisions like which design to go with, you are losing so much valuable experience that the other group members could contribute. Some group members might see advantages to a particular design that the boss didn’t see and by involving the group the best designs are less likely to be missed.

As for the final product, I think the team had some good ideas and had flushed out what goals needed to be achieved, but the cart still needed more work. I’m sure the very limited time frame within which the team had to work contributed to this. The argument was made that by removing the one big basket and creating just a frame for small baskets to sit in, people would be less likely to steal the cart because there would be no basket. But people could just as easily sneak the small baskets out and have a complete cart. Another problem with using just small baskets is that the total available volume to hold your items would be greatly reduced. Reducing the volume will likely reduce how much customers would buy. If anything, the cart should have more volume so people can put more items inside to buy. The hooks from which you could hang your bags also had drawbacks. If the bags ripped the contents would spill onto the floor. There were also a limited number of hooks which would again cause reduced volume which in turn would encourage the customer to buy less. One thing I did like about the design was the fact that the big bulky cart could be left aT the end of the aisle allowing people to more easily move around in the aisle and get the items they needed.