Give a brief summary of the product.
Control – pause, play, stop, etc. Students have chance to respond to questions
Message – list major messages. Could typify the messages – this set is about importance of heart, this set about what happens inside heart, etc. Classify messages give main messages
Strategy – perhaps timing(how long each activity will happen). Social organization, roles, responsibilities, sequence of events, strategy of events, etc.
Content – summarize content and maybe refer to outside article. Including diagram would be good. Include the shocking of heart. Describe cause and effect (and how-?)
Data Management – data kept on individual students. This layer is interested in data generated during instruction that can be used later in the instruction or on another instruction.
Media Logic Layer – (often you keep referencing the same thing in your design but u focus on a different part). Tell what instructor should be looking for. So, device does this, devices does this, etc.
Use a dynamic, computed model of heart so the content layer sends info – so I’m using an animation generator. – it would create a dynamic representation.
Messages don’t have to be verbal.
Many things we do as designers we don’t have names for. We don’t have a language of “message design,” but we should – same for other layers.
Data Layer – data that will be stored – use this to make future decisions about activities, etc.
Layers allow specialties to create their part of the design, or rather, to figure out all the details that are needed to make the design work. Otherwise, one person (who doesn’t know about certain layers very well) would have to write it all and it’s a pain to do and it doesn’t come out as good as it could.
How will student be engaged in this learning.
Social Learning Theory – Albert Bandura
Bobo Doll experiment
Give attention to behavior, retain behavior (memory), ability to reproduce, motivation to do so.
When people understood they were able to do something, they were more likely to try.
Bandura started as a behaviorist and turned into a Cognitivist because of his experiments.
Describe Design Doc. In terms of Layers
If you haven’t planned things carefully from the beginning of an Instructional Design it will be a big pain. But if you can break ur design down into layers you can see what you will need and it will be easier to see what is missing and u are more likely to see what u are missing earlier on.
It is probably also easier to make changes and see how those things will affect the other aspects of the design.
Layers form when a specialty forms and people tend to work within layers.
So, when a design starts being broken down into layers, you know who should work to develop a certain part of the design because the person who specializes in one layer will work on that layer.
The first heading in paper will be an intro. About 2 paragraph. Talk about what you have designed and how it is intended to be used (one para per each).
Other paras - further more is what has to go on in the layers (functions) that has to be performed in each of the layers.
Describe representation first (b/c this is the concrete part)
Control Layer – explain what the controls are and what the purposes of the controls are.
Message Layer – what kinds(not nec. specific messages) of messages will be nec (intro, directions, content messages, etc)
Strategy Layer - (where the conversation takes place between learning and instruction) determine what conversation take place when (and why?)
Content Layer- a set of cause effect relationships out of which a model of a heart can be built – the hearts rules so to speak (this will be hard to explain) – be able to explain WHY the heart beats – pacemaker . make a table, - this happens and as a result this happens. X occurs and then makes y happen. Make this into a table. – make this very general, a page or page or a half at most.
Data management Layer -
Media Logical Layer -
Put into the design doc enough info so that someone else could build this thing without talking to you about it.
My Heart Design - Re-designed!
Tuesday night I decided I wanted to completely re-design my idea for the heart design project. As I watched the moive “Iron Man” I saw the main character use an interactive hologram. I want to make my heart design based off of this idea.
The use of Hologram technology in the motion picture "Iron Man."
MY DESIGN
This is how I envision the lesson beginning. There is a table top-like surface and hovering slightly above it in the air is the hologram of a human slightly transparent but with somewhat of a solid like look (similar to what is seen in the movie clip above). The coloring would appear very close to real life, but with the alpha level turned down a little (creating the transparent affect and also allowing you to see all the organs but also see past them kind of like x-ray vision). The figure is posed much like Leonardo’s famous anatomical drawings of a man, the figure is also spinning slowly around its y-axis allowing the user to get a full view of the figure. Words would appear would appear above the figure like “learn about your heart” or “why does your heart beat,” or “What makes you tick?” I should point out that this design could be used with any number of lessons about human anatomy so the messages above the figure could just as easily be about some other body function. There could also be audio such as appealing music and a voice reading the words that are floating over head.
User Interface
There would be a few “buttons” and upon clicking them additional options would appear, similar to a drop down list in a computer application. The user of this hologram would be able to “zoom” in and out of the figure so you could look closely at the heart. The option would be there to make other organs appear or disappear such as “view muscles,” “view bones,” “view lungs,” etc. This way the user can control how much they see or don’t see. If they want to look closely at the heart without being distracted by other parts of the body they might zoom in close and select to have nothing visible but the “heart” (no doubt a few other parts would be include in the “heart only view”) or they could zoom out and include other organs to see how everything looks together. There would also be a way to select between “normal view” (just seeing the organ, such as the heart) or cutaway view (where the part of the heart facing you would be removed so you could see inside). Because this could become confusing or the learner could struggle with the controls, there would be several predetermined views (highlighting different aspects of the heart)that they could also select.
There would also be a way to choose to view the heart functions and such as “view movement.” By choosing this the user could see the heart beating (and also see how the other systems they have chosen to view operate in relation to the heart). They could speed up, slow down or pause the movement. The user would also be able to rotate the hologram around the x and y axis to see it from different angles.
In addition to what I have mentioned, the user could interact with the hologram just like in the Iron Man clip. Learners could reach into the heart and “squeeze” different areas to see how the contracting spaces forces blood out of the chamber.
Tutorials
All of the things I have described give the user the ability to explore just about any part or function of the heart that they want. But before they are ready to do this, they will probably need some automated tutorials about the heart. This would be the final “button” the user could select. Choosing the “view heart tutorials” would bring up a list of different tutorials that would run through different aspects of the heart. One might talk about how the values work and how blood flows through the heart. Another might explain where the blood comes from in the body and where it goes to once it has been oxygenated. One tutorial could explain how the heart and lungs interact and the final tutorial could demonstrate how the pacemaker interacts with the heart.
These tutorials could be paused, speed up, slowed down, rotated, etc (pretty much all the same controls that were available when the tutorial wasn’t playing) allowing the user to stop and experiment with what they are hearing in the tutorial.
The tutorials themselves would consist of a pre-determined view of the heart specific to the topic of the tutorial (such as certain elements visible, rotated a certain way, etc) but these could be changed by the student at will during the animation to allow for exploration. The hologram would demonstrate what the audio narration would be explaining. Important terms, such as ventricle, would appear as words above or next to the hologram. If the term is a part of the heart, the part of the heart would be temporarily highlighted (shown brighter than the rest of hologram) and/or pointed to with an arrow.
Check for Understanding
Finally, the device might ask the students questions to test their understanding of the content. If the students don’t know the answer they can be referred to different tutorials that might help them find the answer or told to look at a certain part of the heart or watch a certain function.
Introduce Concept: Heart
The first thing I would do would be to try and activate the students’ prior knowledge as well as learn how much the students already understand about the topic. Students of this age should have some prior knowledge about the circulatory system and maybe even a basic understanding of how the heart and lungs work. I could have students share things with the class that they remember as well as give them some terms and see if they know what they mean. I could also ask basic questions about the actual functions of the heart.
Start Adding to their Knowledge
I would then walk then introduce the students to the animation (but not run the animation yet) and help them identify important parts of the heart and learn the terms for these parts. I would focus on the ventricles and atriums. Once they had the terms down I would run through the animation one frame at a time and explain to them what was happening as I did so. There are a few things that I must make clear about the diagram.
The animation on the Utah.edu site doesn’t show where the blood is coming from or where it is going to. Just looking at the model the students could get the incorrect notion that blood coming into both sides of the heart is coming from anywhere in the body completely missing the importance of the lungs. They could also make the assumption that blood being pumped out of both sides of the heart could be going out to anywhere in the body again forgetting the lungs. Special care must be taken to ensure students understand that blood pumped OUT of the “blue” side is going to the lungs and that blood coming into the “red” side is coming in from the lungs.
An additional problem with this animation is that it makes the blood appear blue! Our blood is never blue, it is always red. True, the shade of red changes depending on whether or not the blood is oxygenated, but it is never blue. This is a false idea we get from looking at our veins which appear blue (although they are not blue, they just look that color through our skin) and from models and animations such as this one that label veins and the blood within them blue.
Also something to be aware of is the fact that when you are looking at the animation of the heart, you are not looking at a mirrored image, you are looking at the heart as if you could see into the chest of someone standing in front of you with their face towards you. Thus the right ventricle and atrium are on the left side of the diagram and vice versa for the other side of the diagram.
September 30, 09 - Layers and the Miracle Box
Expectations – Russell Osguthopre
Learning over time decays or it grows to a certain point at which it is stable and isn’t lost or learning continues to grow forever.
If you don’t have high expectations for learning you probably won’t learn much. – how true!
Success raises your expectations about learning and this creates a cycle that continues to increase! The more success the greater the person’s expectations and so the greater the success and on and on.
ADDIE/ISD –the miracle box!
Layers – different specialties just like in a building, lighting is one, drywall another, etc.
Any technology that gets advanced it splits into different areas or specialties.
Don’t try and do it all! Learn as much as you can and if you are going to manage a team of people you won’t do it all yourself, and you will manage a team. And the more you know about all these different specialties the better when you are leading a group.
Cheaper, better, faster. That’s what we will offer!
May as well buy these books: Look at Brans’ book, “how buildings learn.” Also look at Schon, “educating the reflective practitioner.”
Each domain (layer) has its own design language (drywall terms for drywall layer, electric terms for electrical domain, etc).
Layers are in the mind of the designer. If one layer posses a greater number of layers than another, then he is so much the better in the world of design than the other.
Instructional Design – good to use a 7 layer system, but layers can have lots of sub-layers!
See ur design in terms of layers from the beginning so you don’t have to destroy ur design to add something to it.
Also buy the book “Design rules: the power of…” by Baldwin and Clark
How do u know what the right number of layers is? You don’t! We aren’t looking for absolute truth but for what works, there no absolutes in terms of answers (at least we aren’t trying to find them), we are just trying to find something that works.
If it works, its’ good enough.
Layers, domains (and sometimes modules) are all the same (sometimes modules are something totally different but uses the same name).
Anytime you speak of layers think of functions!
Representation layer – only layer that a sensory experience for one of more learners (in Gibbon’s mind) and therefore the only one that has concrete presence. The rest are abstract. Motion is part of representation too!
There has to be a set of control (which u could call the control layer) that provides people with an opportunity to respond.
Message layer – might include several elements such the name of a step, an action, what you see, or when you are finished. – the intention to make a communication from a certain type
Control and message layer is where communication takes place. Control is the user’s communication and the message layer is what the instructor or program communicates back to the learner.
September 28, 09 - My Impressions/Class Notes
Problem Based Learning – student is just thrown into a learning problem and students have to figure it out themselves. This is similar to what we had to do in this class with our assignment to present on various topics that we really don’t know what we are doing. That is we all come up with our own solutions although they may not always be the right method.
Used in medical schools.
The extreme version of this would probably not be good to use with younger students. The instructional designer needs to be aware of the age/ability level of the students.
Similar to guided instruction? The instructor guides learning. IN PBL the tutor doesn’t do that. He doesn’t take part in the actual learning. He just makes sure that they are doing their parts (is there more to this?)
What we know, what we need to know, where, assignments. Each group member keeps track of one of these things.
When there is a well control problem based learning method is used students are superior to students who just memorize rote material. This is because in problem based learning student not only learn the info, they learn the processes nec. to find answers.
This balance is very crucial and must be maintained. If it is up-set, this will not work.
Works well with something that has a correct answer. Used with professional training.
Design Based Research – something that we should look at.
You find the operational principle by taking away different parts of a design until you find it.
I THINK PROBLEM BASED LEARNING MIGHT BE SOMETHING I’D BE INTERESTED IN STUDYINGMORE ABOUT AND MAYBE EVEN TRY DESIGNING! –pros/cons of doing this for a career - I bet it takes for ever to make a design, but it pays pretty good too!
AND NOW FOR SOMETHING COMPLETELY DIFFERENT!
ADDIE/ISD
ADDIE - Analysis, Design, Development, Implementation, and Evaluation
ISD-Instruction Systems Development (outgrowth of system design or approach)
Under this system there is usually a “miracle box” in which you are told to design something but you aren’t told how to design it.
There are hundreds of ISD models.
As designers, we need to know what happens inside the “miracle box.”
3 ideas(this was in the lemonade stand reading):
1.Decision Making Cycle- Process that rationalizes the steps that a person would go through while making a design decision. A DESIGN IS JUST A BUNCH OF DESCISION THAT HAVE BEEN MADE. All you have to do is make a decision! A bunch of design decisions put together is a decision document.
2. Staff Action Pattern
3. Design Layers (aka architecture)
Schema and Mental Models – This is the one I presented on. Used the restaurant analogy which I thought went very well.
Operant Conditioning – Stimulus yields response. But reinforcers are used to adjust, change or re-enforce a behavior.
Skinner box and pigeons!
This is a good system to use with lower order learning. Good with Dogs, not so good with higher order thinking in humans (or so I believe).
In order for this to work, the subject must want the re-enforcement.
Reciprocal Teaching - Instructional theory
4 strategies: Questioning, Summarizing, Clarifying, Predicting
At first the teacher leads the discussion and teaches them this strategy (this is usually done in reading circles). Gradually the students take over and teacher moves to the outside of the circle.
Students know they are responsible for certain types of questions that are related to gaining reading comprehension.
Students would also rotate through who asks and leads the discussion for a certain kind of question.
The principle of reciprocal teaching is that the group creates a model of cognitive processing and the group gets to see that model again and again until it is internalized. – Students learn how to learn.
Rand Spiro - cognitive Flexibility Theory
Variable content and variable application of that content. – Such as in medical school, lots of things people could be suffering from but hard to tell what is the actual cause.
Do mini case studies which can help improve students’ learning.
Multiple perspectives – kind of you get lots of different views or ideas about a topic and you look at them all and sort of build your own understanding about the topic. That’s basically what I did when preparing my presentation on Schema and Mental Models. There was a lot of stuff and it all kind of said something different but I was able to work out myself what all this meant.
Before the sources you viewed would be controlled, but with this you would sort it all out.
We are constantly forming and reforming what we know or maybe I should say, you improve your understanding, you see more of the nuisances or see new connections and add new pieces of information to what you already knew.
How humans learn is vital to instructional design!
